Jacquard : Cyanotype 2 Component Set


2 Component Set for photographic blueprints on paper and fabric
Quick Instructions:
Jacquard’s Cyanotype Set makes DIY cyanotype printing as easy as can be. The chemistry comes premeasured in lightproof black bottles. Simply fill each bottle with water to create Stock Solutions A & B and mix the two in equal parts to create the cyanotype sensitizer. Coat fabric or paper with the sensitizer and, once dry, create prints by exposing to sunlight or UV (3-15 minutes, depending on conditions), using objects or a film negative to create an image. After exposure, prints are processed in a tray of cool water and allowed to air dry over about 24 hours; prints will oxidize to their final deep blue color. To instantly oxidize the print to its final color, submerge in a dilute bath of hydrogen peroxide after washing, then rinse and dry.

Any natural surface, including cotton, linen, silk, canvas, wool, paper, wood and leather.


Part A - Potassium Ferricyanide 0.8 oz/22.68 g
Part B - Ferric Ammonium Citrate 1.9 oz/53.86 g

This set contains enough chemistry to make approximately 65 – 8.5”x11”/21.59 cm x 27.94 cm prints
on paper or 50 – 8.5”x11”/21.59 cm x 27.94 cm prints on fabric, depending on the absorbency of the substrate.